The Flexi-Peg


Flexi-Peg (Black- loose) HFBC2401 Flexi-Peg (Black- bagged in 5’s with card inserts) HABC0600 Flexi-Peg (Yellow – loose) HFBC2401Y Flexi-Peg (Yellow- bagged in 5’s with card inserts) HABC0600Y

The Flexi-Peg is a durable marker with a wide range of uses in the countryside, on the estate, by the river, on the golf course or at the garden centre.

The Flexi-Peg is a constructed to a unique design to stand up to the practicalities of everyday marker use in the rural environment. Designed to be knocked flat and spring back to its full height if trodden on or run over the Flexi-Peg provides the labour saving answer to marking problems at shoots, angling competitions and other countryside events.

The Flexi-Peg is available in Yellow, Neutral or Black, it comes packed in bags of five with a display header card and card inserts or loose in boxes of fifty.

Extra strong for rugged use, UV protected, and manufactured in the UK by Osprey BEC the Flexi-Peg has a myriad of uses where you need to mark your territory!

YouTube Preview Image

BEC Bedding Protector & Feed Tray


Part Number: GFDLBK

BEC have come up with a new product that is designed to prevent your birds wetting bedding and wasting water and feed. Used in conjunction with the 44 cm Chick Disco Stand (HCBC200) the Bedding protector can save your bedding costs and cut back on feed waste by your young birds.

The BEC bedding protector can also double up as a 58cm chick tray with a low level rim!

The bedding protector/ 58 cm chick tray comes in boxes of ten or pallets of 256.

50cm Linear Feeder

Part Number: HCBC760NEO

The large version of the BEC Linear feeder is suitable for larger Poultry and game birds. There are 50cm long with a height 12.5cm [with legs extended 18cm] and a Width of 16cm – that takes up to 3.5 kg of feed.

The Linear feeder has an efficient snap closure that is easy to lock preventing accidental spillage.

The top of the Linear feeder has optimally sized feed holes and ridges designed specifically to prevent birds perching on the top and fouling feed.

The Linear feeder can be combined with other units to create a feeder run to support any number of chicks and it can be done simply and quickly!

It can hold all types of feed – wheat, pellets, mash or grit and the grill is hinged to make cleaning really easy. It has extendible legs raising it up out of the birds bedding by 5.5 cm. The grill is designed to prevent the birds scratching food out of the trough.

 YouTube Preview Image

30cm Linear Feeder

Part Number: HCBC750RA

The 30cm (Height 8.5cm Width 11cm) – that takes half a kilo of feed. These are ideal for young birds, poults and pullets.

The 30 cm Linear feeders are ideal for those starting off with poultry rearing – the top of the feeder incorporates an anti-perch bar that will prevent chicks fouling the feed.

The Linear feeder has an efficient snap closure that is easy to lock preventing accidental spillage.
The top of the Linear feeder has optimally sized feed holes and ridges designed specifically for chicks.
The Linear feeder can be combined with other units to create a feeder run to support any number of chicks and birds – and it can be done simply and quickly!

YouTube Preview Image

Spiral Feeder

 

Part Number : HCBC770

Spiral feeders are a basic and easy way to feed your birds – they simply fill up with feed from the container above and the birds peck at the grain in the spring.

The spiral feeder fits directly in to the base of any drum, bucket or container you have at hand. Fitting is easy – simply drill a 4 cm diameter hole in the base of the drum or bucket and drop in the spiral feeder – no further fixings required.

Egg Tray


Part Number : HCBC221

BEC multicoloured stackable, reusable, and washable egg trays – Ideal for storage and cleaning of eggs

Available in a range of colours these durable 30 egg trays are designed with ventilation in mind to ensure that eggs dry quickly – ensuring a rapid turn over.

Wise Cage Feeder


Part Number: HABC0400AGY (Grey)

Part Number:HABC0400 (Green)

 

BEC has designed the revolutionary new Wise feeder for poultry and game keepers who are looking to increase the efficiency of their feeding regime. The Wise Cage feeder is designed to fit on almost any surface—cages, sheds, walls, trees and fence posts. The Dimensions of the feeder are 300mm x 140mm x 250mm

The Wise Cage feeder can take a single  5kg extension cartridge that can increase the capacity up to 10kg ensuring you have the correct amount of feed available to your birds.

The design allows easy access to the lid of the feeder without disturbing caged birds—that is ideal for certain types of game birds and poultry—it has a rain shield to protect the feed, a fine dust drain in the base and is easy to maintain and clean. It will take nearly all types of feed and prevents ‘scratching out’ by birds. The Wise Cage feeder also prevents vermin accessing your expensive feed.

 

click-here-to-buy-now

YouTube Preview Image

Our Expert Says…

” The Wise feeder is a unique design that is ideal for every type of poultry and game bird keeping situation; the feeder can be mounted on almost all surfaces making it useful for both inside and outdoor use.
Mounting can be on either a fence post, coop wall, tree or on any wire mesh or cage wire, the feeder comes with brackets and hooks allowing it to be mounted easily, also making removal simple for cleaning or relocation.


Once the fixing bracket is screwed into position the feeder slides onto the bracket and is held securely in place. The cage version is designed to fit on vertical and diagonal mesh with hooks and tie wraps. The basic single cartridge holds 5kg (10lb) of feed – this can be extended as required by adding one or more extension cartridges each of which holds a further 5kg of feed. It is recommended to use up to a maximum of three sections giving a total holding capacity of 20kg – above this amount extra brackets will be required.


The feeder comes with a rain proof hood and has a fitted front weather protector that fits neatly over the feed tray. The design of the front lip is rolled inwards making it completely anti scratch therefore stopping the chickens wasting feed.

Dome Master Drinker Spare Parts


Dome Drinker Spares 

Dome

Drinker Base

 

 

 

 

Part No Description Pack Each
HCBC265 Valve Nut (red) 1 £POA
HCBC261 Clear Filter Cover 1 £POA
HCBC262 Filter 1 £POA
HCBC270 Filter Seal (black) 1 £POA
HCBC263 Valve Spring 1 £POA
HCBC264 Valve Washer/Pin (black) 1 £POA
HCBC266 Drinker Valve (yellow) 1 £POA
HCBC268 Main Spring 1 £POA
HCBC267 Dome (red) 1 £POA
HCBC269 Drinker Base (black) 1 £POA

ChickBox Coop Nest Box


Part Number: HABC0234 (brown– with Rollout egg tray & fittings)

Following on from the world wide success of the first version of the Chick Box™, BEC have designed and developed a new version to fit into the wall of hen houses and chicken coops.

Easy to install the new Chick Box™  is aimed at clients looking for a nesting box with rear access – allowing easy external egg collection without entering the hen house.

The new Chick Box™. has all the benefits of the indoor version – The perch bracket is used to block external access to the hen house during the day whilst the rear door is open which allows birds to use the roll out nest tray for laying. In poor weather the external door can be locked – the perch lowered and birds can have access to the nest box.

For more information, please visit our ChickBox website.

YouTube Preview Image

Maxicup Drinker


Part Number: HCBC375

The Maxicup is a semi automatic drinker designed by BEC to use old water tanks, buckets, feed and any other type of container turning them into reservoirs for your birds’ drinking water.
The Maxicup is a self-filling, multi use drinker with a cup capacity of 0.5 litres. It can be fitted to water containers with a water depth of up to 180cm (72”). It is easy to fit, maintain and use.
Ideal for outside or indoor use, the Maxicup is hardwearing and suitable for mostpets, game and wild birds.

Fitting: Simply drill the water container with a 12mm (1/2”) drill at a suitable height for your birds or pets.
Fit the Maxicup by removing the nut & filter, place the Maxicup spigot through the hole leaving the washer on the outside and tighten down the nut until it forms a seal with the wall of the tank – then fit the filter behind the nut. Fill with water, check angle and retighten if necessary.

Maintenance: The Maxicup is simple to maintain, simple undo the two screws securing the cup to the filter cover, separate the two halves and then clean the float and interior of the housing then reassemble.