Duck Drinker

 

Part Number:

HDDD1600AUT (Automatic) HDDD1600 (Manual)

 

 

    

 

 

Specification:

Capacity – auto &/or 16L (Manual)

Pack size – 1 unit

 

 

Description:

Uniquely designed by BEC, this Duck Drinker was created with the duck breeder/keeper in mind

Free standing it also comes with a set of push fit legs raising the reservoir 55 mm off the ground

There are two types of this drinker available, one that is an easy to fill 16L manual drinker and the other is fully automatic that is fed directly from your water supply, this version is fitted with a cut off valve so it keeps the water to the correct level

To clean the drinker simply unplug the grommet and drain the water out.

Although manufactured for ducks, this drinker also proved successful for chickens & geese during trials.

 

 

 

 

The Flexi-Peg

Flexi-Peg (Black- loose) HFBC2401 Flexi-Peg (Black- bagged in 5’s with card inserts) HABC0600 Flexi-Peg (Yellow – loose) HFBC2401Y Flexi-Peg (Yellow- bagged in 5’s with card inserts) HABC0600Y

The Flexi-Peg is a durable marker with a wide range of uses in the countryside, on the estate, by the river, on the golf course or at the garden centre.

The Flexi-Peg is a constructed to a unique design to stand up to the practicalities of everyday marker use in the rural environment. Designed to be knocked flat and spring back to its full height if trodden on or run over the Flexi-Peg provides the labour saving answer to marking problems at shoots, angling competitions and other countryside events.

The Flexi-Peg is available in Yellow, Neutral or Black, it comes packed in bags of five with a display header card and card inserts or loose in boxes of fifty.

Extra strong for rugged use, UV protected, and manufactured in the UK by Osprey BEC the Flexi-Peg has a myriad of uses where you need to mark your territory!

Tripod Drinkers


Part Numbers:

HABC0300A (10 L) HABC0301A (20 L as shown) HABC0302A (30 L)

 

 

 

 

 

Specification:

Base diameter – 42cm

Height – 50cm (10L) 61cm (20L) 70cm (30L)

Capacity – 10, 20 & 30L

Pack size – 1 unit

 

 

Description:

Manufactured using UV stabilised polypropylene and polyethylene these drinkers are designed to cope with the toughest conditions on shoots and poultry farms across the globe

With a solid tripod base, the body is light but durable with a heavy duty carrying handle that is designed to cope with the loads encountered when filling and moving the body

They have a high capacity water pan, easily accessible to various kinds of birds including all sizes of poultry, game birds, ducks, geese and turkeys

The water barrels on the BEC Tripod drinkers are made of translucent plastic so you can easily see the level of the water as you fill it and when you check to ensure your birds are never without water in the field

Filling the unit is done through the top of the tank – while the filling is taking place the spigot is sealed by a rubber key style bung. Once you place the tank onto the tripod you remove the bung, slacken of the carrying handle and let the pan fill – once it covers the outlet pipe you tighten up the carrying handle creating a vacuum that controls the release of water as your birds drink

The BEC Tripod drinkers are stable and operate on uneven ground, although it is always best to try and keep them on a level surface!

 

 

 

 
 For cleaning instructions please click here

 

 

2.5kg Ascot Feeder

Part Number: HABC0003 (indoor with fins & legs)
Part Number: HABC0004 (outdoor with fins & legs)
The Ascot feeder comes with a finned tube to prevent birds from flicking or scratching the feed out and wasting it. The Ascot has a capacity of up to 2.5 kilograms of feed.

The Ascot can be hung indoors or placed on the floor where you can raise it up out of the litter with 7.5cm standard feet.

The outdoor version comes with a securely fitting rain hat that protects the base from the elements and prevents birds fowling feed.
The Ascot is ideal for smaller caged areas.

 

Our Expert Says…

The Ascot is a fresh new feeder design that has been built to suit all chicken keepers; it covers every aspect of poultry keeping being adaptable for use with free range birds as well as birds that are kept in a confined environment.

The feeder has two types of base one with a feed saver grid and another that is open making it suitable for all birds including waterfowl.

Each feeder can be used with or without the removable legs, allowing it to be used as either a free standing or hanging feeder, there is also a cover top to protect the feed when being used indoors.

This feeder is suitable for 4 to 6 standard chickens that are fed on a daily basis, the feeder has a capacity to hold up to 2.5kg of feed.

Outdoors Use
For free range use the Ascot feeder can be stood on the optional 3 – inch legs, these ensure that the feed is kept clean and free from ground contamination. There is also the fully waterproof rain hood, this hood has been designed to fit easily but securely to the top of the feeder barrel, this makes it almost impossible for the birds to remove while feeding ensuring the feed is kept in a good dry condition which is especially important in adverse weather conditions.

Indoors Use
Using the Ascot as a hanging unit is made quite simple by having a strong metal bar that fits tightly inside the top of the feeder tube; this gives a place to fasten securely the chain or cord needed to hang the feeder. When hung- the chain comes through the smaller top cover again making sure the feed is free from contamination.
Filling the feeder is simple, just remove the top and add the feed that finds its own level in the feeder base.

This feeder will suit every chicken keeper’s requirements and is compact enough for even the smallest coops where size is important when space is limited.”

WM2e Automatic Drinker

 

Part Number:

HABC0030

 

 

 

 

 

Specification:

Bowl diameter – 32cm

Height – 28cm (cone only)

Height – 53.5cm (cone, valve & hanger strap)

Capacity – auto

Pack size – 20 units

 

 

Description:

This automatic drinker utilises the proven and reliable BEC Drinker Valve system

The automatic drinkers are designed to be used from a separate header tank and are gravity fed. The water level in the drinker tray is adjustable

The drinker comes with 3m of black tubing, saddle assembly, hanger strap, nylon or plastic covered hanging cord, a slider for height adjustment

The valve includes a filter in the top that can be removed for cleaning

Very easy to use and clean, spares readily available

Suitable for Poultry and Game Birds

 

 

We now offer a unique Bell drinker cover designed to keep the drinking water clean and cool

The Biomaster Guard prevents contamination such as dust, dirt and faeces from entering the automatic drinking system

 

 

 

 

6 Litre Combo Drinker

 

Part Number:

HCBC256

 

 

 

 

 

Specification:

Base Diameter – 36.5cm

Height – 27cm (32.5cm with legs fitted)

Capacity – 6L

Pack size – 10 units

 

 

Description:

A high quality, gravity fed, ground based or hanging Drinker

It has a heavy duty, ergonomically designed carrying handle that doubles up as a hanger and comes with a set of push fit legs raising the reservoir 55 mm above the ground thereby reducing water contamination

The drinker has a twist lock fit base that allows you to fill the drinker with base removed and the top turned over, once filled simply twist and lock the base into position

Very easy to use and clean

Suitable for Poultry and Game Birds