Maxicup Drinker


Part Number:








Capacity – semi auto (0.5L cup)

Pack size – 46 units

Hole in container needed- 12mm





The original and still the best semi automatic drinker designed by BEC

To use with old water tanks, buckets, feed and any other type of container turning them into reservoirs for your birds’ drinking water

The Maxicup is a self-filling, multi use drinker with a cup capacity of 0.5 litres

It can be fitted to water containers with a water depth of up to 180cm (72”)

Ideal for outside or indoor use, the Maxicup is hardwearing and suitable for most poultry, game, pets and wild birds

Very easy to use and clean






Drill the water container with a 12mm (1/2”) drill at a suitable height for your birds or pets

Fit the Maxicup by removing the nut & filter, place the Maxicup spigot through the hole leaving the washer on the outside and tighten down the nut until it forms a seal with the wall of the tank, then fit the filter behind the nut

Fill with water, check angle and retighten if necessary




The Maxicup is easy to maintain, simply undo the two screws securing the cup to the filter cover, separate the two halves and then clean the float and interior of the housing, then reassemble