50cm Linear Feeder

Part Number: HCBC760NEO

The large version of the BEC Linear feeder is suitable for larger Poultry and game birds. There are 50cm long with a height 12.5cm [with legs extended 18cm] and a Width of 16cm – that takes up to 3.5 kg of feed.

The Linear feeder has an efficient snap closure that is easy to lock preventing accidental spillage.

The top of the Linear feeder has optimally sized feed holes and ridges designed specifically to prevent birds perching on the top and fouling feed.

The Linear feeder can be combined with other units to create a feeder run to support any number of chicks and it can be done simply and quickly!

It can hold all types of feed – wheat, pellets, mash or grit and the grill is hinged to make cleaning really easy. It has extendible legs raising it up out of the birds bedding by 5.5 cm. The grill is designed to prevent the birds scratching food out of the trough.

 

30cm Linear Feeder

 

Part Number: HCBC750RA

The 30cm (Height 8.5cm Width 11cm) – that takes half a kilo of feed. These are ideal for young birds, poults and pullets.

The 30 cm Linear feeders are ideal for those starting off with poultry rearing – the top of the feeder incorporates an anti-perch bar that will prevent chicks fouling the feed.

The Linear feeder has an efficient snap closure that is easy to lock preventing accidental spillage.
The top of the Linear feeder has optimally sized feed holes and ridges designed specifically for chicks.
The Linear feeder can be combined with other units to create a feeder run to support any number of chicks and birds – and it can be done simply and quickly!

Spiral Feeder

Part Number : HCBC770

Spiral feeders are a basic and easy way to feed your birds – they simply fill up with feed from the container above and the birds peck at the grain in the spring.

The spiral feeder fits directly in to the base of any drum, bucket or container you have at hand. Fitting is easy – simply drill a 4 cm diameter hole in the base of the drum or bucket and drop in the spiral feeder – no further fixings required.

Wise Cage Feeder

Part Number: HABC0400AGY (Grey)

Part Number:HABC0400 (Green)

 

BEC has designed the revolutionary new Wise feeder for poultry and game keepers who are looking to increase the efficiency of their feeding regime. The Wise Cage feeder is designed to fit on almost any surface—cages, sheds, walls, trees and fence posts. The Dimensions of the feeder are 300mm x 140mm x 250mm

The Wise Cage feeder can take a single  5kg extension cartridge that can increase the capacity up to 10kg ensuring you have the correct amount of feed available to your birds.

The design allows easy access to the lid of the feeder without disturbing caged birds—that is ideal for certain types of game birds and poultry—it has a rain shield to protect the feed, a fine dust drain in the base and is easy to maintain and clean. It will take nearly all types of feed and prevents ‘scratching out’ by birds. The Wise Cage feeder also prevents vermin accessing your expensive feed.

 

click-here-to-buy-now

 

Our Expert Says…

” The Wise feeder is a unique design that is ideal for every type of poultry and game bird keeping situation; the feeder can be mounted on almost all surfaces making it useful for both inside and outdoor use.
Mounting can be on either a fence post, coop wall, tree or on any wire mesh or cage wire, the feeder comes with brackets and hooks allowing it to be mounted easily, also making removal simple for cleaning or relocation.


Once the fixing bracket is screwed into position the feeder slides onto the bracket and is held securely in place. The cage version is designed to fit on vertical and diagonal mesh with hooks and tie wraps. The basic single cartridge holds 5kg (10lb) of feed – this can be extended as required by adding one or more extension cartridges each of which holds a further 5kg of feed. It is recommended to use up to a maximum of three sections giving a total holding capacity of 20kg – above this amount extra brackets will be required.


The feeder comes with a rain proof hood and has a fitted front weather protector that fits neatly over the feed tray. The design of the front lip is rolled inwards making it completely anti scratch therefore stopping the chickens wasting feed.

Wise Mountable Feeder

Part Number: HABC0401AGY (Grey)

Part Number: HABC0401AGRN (Green)

 

BEC has designed the revolutionary new Wise Mountable feeder for poultry and game keepers who are looking to increase the efficiency of their feeding regime. The Wise Mountable feeder is designed to fit on almost any surface—cages, sheds, walls, trees and fence posts. The Dimensions of the feeder are 300mm x 140mm x 250mm—each cartridge is 300mm x 140mm x 180mm (LxWxH).

The Wise Mountable feeder is a modular feeder with a 5 kilo extension cartridge. Additional Silos and Mounting Brackets are available so you can vary the capacity from the basic 10 kilos Mountable feeder right up to 20kilos —ensuring you have the correct amount of feed available to your birds.

The design allows easy access to the lid of the feeder without disturbing caged birds—that is ideal for certain types of game birds and poultry—it has a rain shield to protect the feed, a fine dust drain in the base and is easy to maintain and clean. It will take nearly all types of feed and prevents ‘scratching out’ by birds. The Wise feeder also prevents vermin accessing your expensive feed.

 

 

 

Our Expert Says…

” The Wise feeder is a unique design that is ideal for every type of poultry and game bird keeping situation; the feeder can be mounted on almost all surfaces making it useful for both inside and outdoor use.
Mounting can be on either a fence post, coop wall, tree or on any wire mesh or cage wire, the feeder comes with brackets and hooks allowing it to be mounted easily, also making removal simple for cleaning or relocation.


Once the fixing bracket is screwed into position the feeder slides onto the bracket and is held securely in place. The cage version is designed to fit on vertical and diagonal mesh with hooks and tie wraps. The basic single cartridge holds 5kg (10lb) of feed – this can be extended as required by adding one or more extension cartridges each of which holds a further 5kg of feed. It is recommended to use up to a maximum of three sections giving a total holding capacity of 20kg – above this amount extra brackets will be required.


The feeder comes with a rain proof hood and has a fitted front weather protector that fits neatly over the feed tray. The design of the front lip is rolled inwards making it completely anti scratch therefore stopping the chickens wasting feed.

2.5kg Ascot Feeder

Part Number: HABC0003 (indoor with fins & legs)
Part Number: HABC0004 (outdoor with fins & legs)
The Ascot feeder comes with a finned tube to prevent birds from flicking or scratching the feed out and wasting it. The Ascot has a capacity of up to 2.5 kilograms of feed.

The Ascot can be hung indoors or placed on the floor where you can raise it up out of the litter with 7.5cm standard feet.

The outdoor version comes with a securely fitting rain hat that protects the base from the elements and prevents birds fowling feed.
The Ascot is ideal for smaller caged areas.

 

Our Expert Says…

The Ascot is a fresh new feeder design that has been built to suit all chicken keepers; it covers every aspect of poultry keeping being adaptable for use with free range birds as well as birds that are kept in a confined environment.

The feeder has two types of base one with a feed saver grid and another that is open making it suitable for all birds including waterfowl.

Each feeder can be used with or without the removable legs, allowing it to be used as either a free standing or hanging feeder, there is also a cover top to protect the feed when being used indoors.

This feeder is suitable for 4 to 6 standard chickens that are fed on a daily basis, the feeder has a capacity to hold up to 2.5kg of feed.

Outdoors Use
For free range use the Ascot feeder can be stood on the optional 3 – inch legs, these ensure that the feed is kept clean and free from ground contamination. There is also the fully waterproof rain hood, this hood has been designed to fit easily but securely to the top of the feeder barrel, this makes it almost impossible for the birds to remove while feeding ensuring the feed is kept in a good dry condition which is especially important in adverse weather conditions.

Indoors Use
Using the Ascot as a hanging unit is made quite simple by having a strong metal bar that fits tightly inside the top of the feeder tube; this gives a place to fasten securely the chain or cord needed to hang the feeder. When hung- the chain comes through the smaller top cover again making sure the feed is free from contamination.
Filling the feeder is simple, just remove the top and add the feed that finds its own level in the feeder base.

This feeder will suit every chicken keeper’s requirements and is compact enough for even the smallest coops where size is important when space is limited.”

Grit Station

Part Number: HABC0260

The new heavy duty BEC Grit/Feed station is designed to provide easy access to feed and grit for a wide range of poultry, pigeons and game birds.

The BEC grit/feeder station has an anti-perch top to make sure feed and grit cannot be contaminated by droppings.

The capacity of the BEC Grit/Feed station depends on type of feed – but we have found that it is around 3kg pellets.

Size: 27cm wide overall, 27cm high overall

Cage Cup

Part Numbers:
HCBC420DGRN (Green)
HCBC420LBL (Light Blue)
HCBC420R (Red)
HCBC420WH (White)
HCBC420Y (Yellow)
HCBC420GRNNEO (Anise Green)
HCBC420RRNEO (Raspberry Red)
HCBC420SGYNEO (Shining Light Grey)
HCBC420VNEO (Violet)

Available in nine colours, the cage cups are ideally suited to a wide range of purposes

1.5 Kg Feeder With Rain Hat

Part Number: HCBC231

This feeder is ideal for the rearing of young birds, the fitted rain hood keeps the feed clean and dry which makes it ideal for chicks that have access to the outdoors.
Broody hens that are rearing their own broods spend time outdoors and this gives the chicks access to feed while being reared naturally.
This is also perfect for indoor use in the brooder as the hood prevents perching and keeps the feed from getting soiled therefore helping to prevent disease affecting the young birds.
The feeder holds 1.5kg of feed and is ideal for chick crumbs and growers feed.

25kg King Feeder Outdoor

 

Part Number: HABC0070

 

 

The BEC outdoor King Feeder has a capacity of 25 kilograms of feed. Floor standing or supported by the BEC Drinker and Feeder Stand (HCBC200).

The King Feeder is manufactured in the UK, in polypropylene; the whole assembly is corrosion free with an infinitely adjustable feed rate. The feed pan size is 48 cm.

The King Feeder now has an optional Feed saver ring designed to prevent birds flicking feed from the pan (HFBC1996) saving money by reducing feed waste.

 

Our Expert Says…

” This King feeder is perfect for any poultry keeper who keeps a larger flock, this feeder can be used as an indoor floor based or indoor hanging feeder, it comes with a lid supplied to prevent the birds from perching on the feeder this also helps to keep the feed clean and fresh.

The King feeder can also be used very successfully outside as it can be fitted with a specially designed rain hat that gives total protection from any inclement weather. With a capacity of 25kg this makes it one of the largest feeders available on the market today and one that is ideal for all situations.

Made in the UK the King feeder is very easy to clean and maintain, the rain hat fits easily and as a general feeder it is ideal for all breeds of Chicken, Turkeys and Waterfowl and I recommend this for use with your egg laying hybrid flock .”